「NTP」の版間の差分

提供: Wikinote
移動: 案内、検索
細
細 (→‎処理の流れ)
 
(同じ利用者による、間の18版が非表示)
行1: 行1:
 +
Network Time Protocol
 +
 
やってることは単に時刻を合わせて、時計の進み方を正確にするだけなのに、異様に奥が深い NTP について。
 
やってることは単に時刻を合わせて、時計の進み方を正確にするだけなのに、異様に奥が深い NTP について。
−
 
+
ちなみに、ntp 付属文書の [http://hagio.org/docs/ 日本語訳] やってます。いつまでかかることやら。  
−
手前味噌ですが、ntp 付属文書の [http://hagio.org/docs/ 日本語訳] やってます。いつまでかかることやら。  
+
これ [http://www.amazon.co.jp/Expert-Network-Time-Protocol-Experience/dp/1590594843/hagio.org-22 Expert Network Time Protocol: An Experience in Time with NTP (Expert)] 誰か翻訳して…。
  
 
== 参考文献 ==
 
== 参考文献 ==
−
* [http://www.ntp.org/ ntp.org] ソースの次に信頼できるサイト。翻訳したい。
+
* [http://www.ntp.org/ ntp.org] NTP Project のサイト。
 +
* [http://www.eecis.udel.edu/~mills/ntp.html Network Time Synchronization Research Project] NTP Project の David Mills 先生のサイト。
 +
* [http://tools.ietf.org/html/rfc5905 Network Time Protocol Version 4: Protocol and Algorithms Specification] RFC-5905
 +
* [http://tools.ietf.org/pdf/rfc1305.pdf Network Time Protocol (Version 3) Specification, Implementation and Analysis] RFC-1305
 +
* [http://www.rr.iij4u.or.jp/~zubora/ntpcook-20070413-1.pdf NTPメモ] おそらく日本語で書かれた NTP 関連ドキュメントとしては'''最強'''。
 
* [http://www.linux.or.jp/JF/JFdocs/TimePrecision-HOWTO/ Managing Accurate Date and Time] Linux での時刻管理に関する JF ドキュメント。
 
* [http://www.linux.or.jp/JF/JFdocs/TimePrecision-HOWTO/ Managing Accurate Date and Time] Linux での時刻管理に関する JF ドキュメント。
 
* [http://www.linux.or.jp/JF/JFdocs/Clock/ The Clock Mini-HOWTO] ''コンピュータに正確な時間を設定して、時計が狂わないようにする方法。''
 
* [http://www.linux.or.jp/JF/JFdocs/Clock/ The Clock Mini-HOWTO] ''コンピュータに正確な時間を設定して、時計が狂わないようにする方法。''
行10: 行16:
 
* [http://wiki.nothing.sh/page/NTP NTP - wiki@nothing] NTP を使うだけの人はここを見るべき。
 
* [http://wiki.nothing.sh/page/NTP NTP - wiki@nothing] NTP を使うだけの人はここを見るべき。
 
* [http://ja.wikipedia.org/wiki/Network_Time_Protocol Network Time Protocol - Wikipedia] 概要を思い出したいときに見る。
 
* [http://ja.wikipedia.org/wiki/Network_Time_Protocol Network Time Protocol - Wikipedia] 概要を思い出したいときに見る。
 +
* [http://itpro.nikkeibp.co.jp/article/COLUMN/20081015/316880/ NTPの秘密を探る - ITpro] ntpd の動作の説明が正確。
 +
 
=== うるう秒関連 ===
 
=== うるう秒関連 ===
 
* [http://www-06.ibm.com/jp/domino01/mkt/cnpages7.nsf/page/default-0019DB89 Linux at IBM |【Technical Notes】Linux システムクロックの『うるう秒』調整]
 
* [http://www-06.ibm.com/jp/domino01/mkt/cnpages7.nsf/page/default-0019DB89 Linux at IBM |【Technical Notes】Linux システムクロックの『うるう秒』調整]
 +
 +
== メモ ==
 +
* ntpd はサーバでもクライアントでも UDP 123 番ポートを用いる。
 +
 +
=== ntpd の動作について ===
 +
==== 処理の流れ ====
 +
主に、ntp_proto.c および ntp_loopfilter.c まわり。
 +
<toggledisplay>
 +
--- init_proto
 +
--- default_get_precision
 +
--- proto_clr_stats
 +
--- init_loopfilter
 +
--- rstclock
 +
--- loop_config
 +
--- peer_clear
 +
--- loop_config
 +
--- rstclock
 +
--- adj_host_clock
 +
--- transmit
 +
--- clock_filter
 +
--- peer_xmit
 +
--- poll_update
 +
--- receive
 +
--- process_packet
 +
--- poll_update
 +
--- clock_filter
 +
--- clock_select
 +
--- peer_unfit
 +
--- root_distance 7.959930
 +
--- adj_host_clock
 +
--- adj_host_clock ★ 1 秒間隔
 +
:
 +
--- adj_host_clock
 +
--- transmit
 +
--- peer_xmit
 +
--- poll_update
 +
--- receive
 +
--- process_packet
 +
--- poll_update
 +
--- clock_filter
 +
--- clock_select
 +
--- peer_unfit
 +
--- root_distance 3.961535
 +
--- adj_host_clock
 +
  :
 +
--- adj_host_clock
 +
--- adj_host_clock
 +
--- transmit
 +
--- peer_xmit
 +
--- poll_update
 +
--- receive
 +
--- process_packet
 +
--- poll_update
 +
--- clock_filter
 +
--- clock_select
 +
--- peer_unfit
 +
--- root_distance 0.965042
 +
--- root_distance 0.965042
 +
--- root_distance 0.965042
 +
--- clock_combine
 +
--- root_distance 0.965042
 +
--- clock_update ★ここまでいくと同期成功
 +
--- poll_update
 +
--- local_clock
 +
--- rstclock
 +
--- adj_host_clock
 +
--- adj_host_clock
 +
</toggledisplay>
 +
 +
== ツール等 ==
 +
 +
=== ntpq コマンド ===
 +
NTP の情報を得るのに最もポピュラーなコマンド。
 +
 +
$ ntpq -pn
 +
      remote          refid      st t when poll reach  delay  offset  jitter
 +
==============================================================================
 +
-202.224.32.4    210.171.225.76  2 u  975  256  370    5.759  -1.264  0.162
 +
-133.243.232.68  210.171.226.40  2 u  30  256  377    9.018  -1.209  0.386
 +
+210.173.160.27  210.173.160.86  2 u  209  256  377    5.452    0.021  0.123
 +
+210.173.160.57  133.243.236.18  2 u  215  256  377    5.741    0.272  0.111
 +
*210.173.160.87  210.173.176.4    2 u  38  256  377    5.817  -0.100  0.222
 +
 +
$ ntpq -c as
 +
 +
ind assID status  conf reach auth condition  last_event cnt
 +
===========================================================
 +
  1 59668  9314  yes  yes  none  outlyer  reachable  1
 +
  2 59669  9314  yes  yes  none  outlyer  reachable  1
 +
  3 59670  9414  yes  yes  none  candidat  reachable  1
 +
  4 59671  9414  yes  yes  none  candidat  reachable  1
 +
  5 59672  9614  yes  yes  none  sys.peer  reachable  1
 +
 +
$ ntpq -c rl
 +
assID=0 status=06c4 leap_none, sync_ntp, 12 events, event_peer/strat_chg,
 +
version="ntpd 4.2.2p1@1.1570-o Tue Jun 10 00:07:18 UTC 2008 (1)",
 +
processor="i686", system="Linux/2.6.18-194.el5PAE", leap=00, stratum=3,
 +
precision=-20, rootdelay=6.168, rootdispersion=25.945, peer=59672,
 +
refid=210.173.160.87,
 +
reftime=cff96bee.64899eac  Tue, Jul 27 2010 23:30:06.392, poll=8,
 +
clock=cff96dc6.30334e8f  Tue, Jul 27 2010 23:37:58.188, state=4,
 +
offset=0.057, frequency=44.983, jitter=0.321, noise=0.254,
 +
stability=0.060, tai=0
 +
 +
$ ntpq -c "pstatus 59670"
 +
assID=59670 status=9414 reach, conf, sel_candidat, 1 event, event_reach,
 +
srcadr=ntp1.jst.mfeed.ad.jp, srcport=123, dstadr=118.243.85.16,
 +
dstport=123, leap=00, stratum=2, precision=-19, rootdelay=0.427,
 +
rootdispersion=12.009, refid=210.173.160.86, reach=377, unreach=0,
 +
hmode=3, pmode=4, hpoll=10, ppoll=10, flash=00 ok, keyid=0, ttl=0,
 +
offset=0.040, delay=6.133, dispersion=15.059, jitter=0.120,
 +
reftime=cff981d4.b4092641  Wed, Jul 28 2010  1:03:32.703,
 +
org=cff98349.637b8c15  Wed, Jul 28 2010  1:09:45.388,
 +
rec=cff98349.6442e24e  Wed, Jul 28 2010  1:09:45.391,
 +
xmt=cff98349.629de6de  Wed, Jul 28 2010  1:09:45.385,
 +
filtdelay=    6.40    6.13    6.04    6.70    6.37    8.75    6.04    6.54,
 +
filtoffset=    0.16    0.04  -0.18    0.13    0.03  -1.28  -0.29  -0.09,
 +
filtdisp=      0.00  15.36  23.03  30.69  38.39  46.08  53.79  61.47
 +
 +
=== ntptime コマンド ===
 +
カーネルの時計関連の情報を表示・設定することができる。
 +
 +
$ ntptime
 +
ntp_gettime() returns code 0 (OK)
 +
  time cd8dcff1.8d374000  Mon, Apr 13 2009 23:51:29.551, (.551624),
 +
  maximum error 20085 us, estimated error 0 us
 +
ntp_adjtime() returns code 0 (OK)
 +
  modes 0x0 (),
 +
  offset 0.000 us, frequency 77.335 ppm, interval 1 s,
 +
  maximum error 20085 us, estimated error 0 us,
 +
  status 0x1 (PLL),
 +
  time constant 6, precision 1.000 us, tolerance 512 ppm,
 +
それぞれの値の意味は…難しいんだこれが。誰か解説本書いてくれないかなあ。
 +
 +
<code>ntp_adjtime()</code> から返っている status 値は、/usr/include/linux/timex.h で定義されている以下の値を取る。
 +
/*   
 +
  * Status codes (timex.status)
 +
  */   
 +
#define STA_PLL                0x0001  /* enable PLL updates (rw) */
 +
#define STA_PPSFREQ    0x0002  /* enable PPS freq discipline (rw) */
 +
#define STA_PPSTIME    0x0004  /* enable PPS time discipline (rw) */
 +
#define STA_FLL                0x0008  /* select frequency-lock mode (rw) */
 +
 +
#define STA_INS                0x0010  /* insert leap (rw) */
 +
#define STA_DEL                0x0020  /* delete leap (rw) */
 +
#define STA_UNSYNC    0x0040  /* clock unsynchronized (rw) */ ★いわゆる 11 分モードのとき、0 になる
 +
#define STA_FREQHOLD  0x0080  /* hold frequency (rw) */
 +
 +
#define STA_PPSSIGNAL  0x0100  /* PPS signal present (ro) */
 +
#define STA_PPSJITTER  0x0200  /* PPS signal jitter exceeded (ro) */
 +
#define STA_PPSWANDER  0x0400  /* PPS signal wander exceeded (ro) */
 +
#define STA_PPSERROR  0x0800  /* PPS signal calibration error (ro) */
 +
 +
#define STA_CLOCKERR  0x1000  /* clock hardware fault (ro) */
 +
 +
#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
 +
    STA_PPSERROR | STA_CLOCKERR) /* read-only bits */
 +
 +
=== ntpdc コマンド ===
 +
 +
ちょっとマイナーだけど様々な情報が得られる。
 +
 +
$ ntpdc -pn
 +
      remote          local      st poll reach  delay  offset    disp
 +
=======================================================================
 +
*210.173.160.87  118.243.85.16    2  256  377 0.00552 -0.000084 0.07770
 +
=202.224.32.4    118.243.85.16    2  256  360 0.00575 -0.001264 0.45509
 +
=133.243.232.68  118.243.85.16    2  256  377 0.00900 -0.001209 0.08156
 +
=210.173.160.27  118.243.85.16    2  256  377 0.00545  0.000021 0.12018
 +
=210.173.160.57  118.243.85.16    2  256  377 0.00574  0.000272 0.09195
 +
 +
$ ntpdc -l
 +
client    ntp3.jst.mfeed.ad.jp
 +
client    orion.asahi-net.or.jp
 +
client    udon.nict.go.jp
 +
client    ntp1.jst.mfeed.ad.jp
 +
client    ntp2.jst.mfeed.ad.jp
 +
 +
$ ntpdc -c "showpeer 210.173.160.27"
 +
remote 210.173.160.27, local 118.243.85.16
 +
hmode client, pmode unspec, stratum 2, precision -19
 +
leap 00, refid [210.173.160.86], rootdistance 0.03963, rootdispersion 0.00789
 +
ppoll 10, hpoll 10, keyid 0, version 4, association 59670
 +
reach 377, unreach 0, flash 0x0000, boffset 0.00400, ttl/mode 0
 +
timer 0s, flags config, bclient
 +
reference time:      cff97e87.bdfef6dd  Wed, Jul 28 2010  0:49:27.742
 +
originate timestamp: cff97f49.6383079f  Wed, Jul 28 2010  0:52:41.388
 +
receive timestamp:  cff97f49.64496620  Wed, Jul 28 2010  0:52:41.391
 +
transmit timestamp:  cff97f49.62b5a175  Wed, Jul 28 2010  0:52:41.385
 +
filter delay:  0.00612  0.00604  0.00668  0.00636
 +
                0.00874  0.00603  0.00653  0.00629
 +
filter offset: 0.000040 -0.00017 0.000134 0.000033
 +
                -0.00128 -0.00029 -0.00009 0.000085
 +
filter order:  1        0        2        3     
 +
                4        5        6        7     
 +
offset -0.000177, delay 0.00604, error bound 0.09654, filter error 0.01637
 +
 +
$ ntpdc -c "pstats 210.173.160.27"
 +
remote host:          ntp1.jst.mfeed.ad.jp
 +
local interface:      118.243.85.16
 +
time last received:  550s
 +
time until next send: 474s
 +
reachability change:  11597s
 +
packets sent:        73
 +
packets received:    73
 +
bad authentication:  0
 +
bogus origin:        0
 +
duplicate:            0
 +
bad dispersion:      0
 +
bad reference time:  14
 +
candidate order:      4
 +
flags:    config, bclient, iburst
 +
 +
$ ntpdc -c kerninfo
 +
pll offset:          5.2e-05 s
 +
pll frequency:        44.985 ppm
 +
maximum error:        0.138157 s
 +
estimated error:      0.000237 s
 +
status:              0001  pll
 +
pll time constant:    4
 +
precision:            1e-06 s
 +
frequency tolerance:  512 ppm
 +
 +
$ ntpdc -c loopinfo
 +
offset:              0.000065 s
 +
frequency:            44.985 ppm
 +
poll adjust:          0
 +
watchdog timer:      235 s
 +
 +
$ ntpdc -c sysinfo
 +
system peer:          ntp3.jst.mfeed.ad.jp
 +
system peer mode:    client
 +
leap indicator:      00
 +
stratum:              3
 +
precision:            -20
 +
root distance:        0.00620 s
 +
root dispersion:      0.02278 s
 +
reference ID:        [210.173.160.87]
 +
reference time:      cff96dec.641c9286  Tue, Jul 27 2010 23:38:36.391
 +
system flags:        auth monitor ntp kernel stats
 +
jitter:              0.000275 s
 +
stability:            0.000 ppm
 +
broadcastdelay:      0.003998 s
 +
authdelay:            0.000000 s
 +
 +
$ ntpdc -c sysstats
 +
time since restart:    6980
 +
time since reset:      6980
 +
packets received:      1415
 +
packets processed:      319
 +
current version:        532
 +
previous version:      0
 +
bad version:            0
 +
access denied:          0
 +
bad length or format:  0
 +
bad authentication:    0
 +
rate exceeded:          0
 +
 +
$ ntpdc -c memstats
 +
time since reset:    7007
 +
total peer memory:    15
 +
free peer memory:    10
 +
calls to findpeer:    533
 +
new peer allocations: 0
 +
peer demobilizations: 0
 +
hash table counts:      0  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        2  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  1  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  0  0  1  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
                        0  0  1  0  0  0  0  0
 +
                        0  0  0  0  0  0  0  0
 +
 +
$ ntpdc -c iostats
 +
time since reset:    7116
 +
receive buffers:      10
 +
free receive buffers: 9
 +
used receive buffers: 0
 +
low water refills:    1
 +
dropped packets:      0
 +
ignored packets:      0
 +
received packets:    1432
 +
packets sent:        2151
 +
packets not sent:    0
 +
interrupts handled:  1414
 +
received by int:      1414
 +
 +
$ ntpdc -c timerstats
 +
time since reset:  7133
 +
alarms handled:    0
 +
alarm overruns:    0
 +
calls to transmit: 0
 +
 +
$ ntpdc -c reslist
 +
    address          mask            count        flags
 +
=====================================================================
 +
0.0.0.0        0.0.0.0              320  noquery, nomodify, nopeer, notrap, kod
 +
y085016.dynamic 255.255.255.255        0  ntpport, interface, ignore
 +
localhost.local 255.255.255.255      911  none
 +
localhost.local 255.255.255.255        0  ntpport, interface, ignore
 +
192.168.1.0    255.255.255.0          44  nomodify, notrap
 +
lab.hagio.org  255.255.255.255        0  ntpport, interface, ignore
 +
192.168.8.0    255.255.255.0        167  nomodify, notrap
 +
192.168.8.1    255.255.255.255        0  ntpport, interface, ignore
 +
192.168.10.1    255.255.255.255        0  ntpport, interface, ignore
 +
::              ::                      0  none
 +
localhost6.loca ffff:ffff:ffff:        0  ntpport, interface, ignore
 +
fe80::20a:79ff: ffff:ffff:ffff:        0  ntpport, interface, ignore
 +
fe80::21f:d0ff: ffff:ffff:ffff:        0  ntpport, interface, ignore
 +
fe80::250:56ff: ffff:ffff:ffff:        0  ntpport, interface, ignore
 +
fe80::250:56ff: ffff:ffff:ffff:        0  ntpport, interface, ignore
 +
 +
$ ntpdc -c monlist
 +
remote address          port local address      count m ver code avgint  lstint
 +
===============================================================================
 +
localhost.localdomain  40435 127.0.0.1            923 7 2      0      6      0
 +
192.168.8.60            123 192.168.8.1          22 3 4    180    290      32
 +
192.168.8.47            123 192.168.8.1          146 3 4    180    96    111
 +
192.168.1.10            123 192.168.1.1          44 3 4    180    230    170
 +
orion.asahi-net.or.jp    123 118.243.85.16        62 4 4    5d0    317    284
 +
ntp1.jst.mfeed.ad.jp    123 118.243.85.16        65 4 4    5d0    225    293
 +
ntp2.jst.mfeed.ad.jp    123 118.243.85.16        64 4 4    5d0    227    299
 +
udon.nict.go.jp          123 118.243.85.16        65 4 4    5d0    225    371
 +
ntp3.jst.mfeed.ad.jp    123 118.243.85.16        64 4 4    5d0    225    380
 +
 +
== その他 ==
 +
* 最近の携帯電話に搭載されている自動時刻合わせ機能は、基地局からの制御情報に含まれる時刻情報を利用している。したがって、i-mode などを用いた NTP でもなければ、標準電波を利用した、いわゆる電波時計でもない。電波っちゃ電波だけど。

2010年10月22日 (金) 00:54時点における最新版

Network Time Protocol

やってることは単に時刻を合わせて、時計の進み方を正確にするだけなのに、異様に奥が深い NTP について。 ちなみに、ntp 付属文書の 日本語訳 やってます。いつまでかかることやら。 これ Expert Network Time Protocol: An Experience in Time with NTP (Expert) 誰か翻訳して…。

参考文献

うるう秒関連

メモ

  • ntpd はサーバでもクライアントでも UDP 123 番ポートを用いる。

ntpd の動作について

処理の流れ

主に、ntp_proto.c および ntp_loopfilter.c まわり。 <toggledisplay> 

--- init_proto
--- default_get_precision
--- proto_clr_stats
--- init_loopfilter
--- rstclock
--- loop_config
--- peer_clear
--- loop_config
--- rstclock
--- adj_host_clock
--- transmit
--- clock_filter
--- peer_xmit
--- poll_update
--- receive
--- process_packet
--- poll_update
--- clock_filter
--- clock_select
--- peer_unfit
--- root_distance 7.959930
--- adj_host_clock
--- adj_host_clock ★ 1 秒間隔
:
--- adj_host_clock
--- transmit
--- peer_xmit
--- poll_update
--- receive
--- process_packet
--- poll_update
--- clock_filter
--- clock_select
--- peer_unfit
--- root_distance 3.961535
--- adj_host_clock
 :
--- adj_host_clock
--- adj_host_clock
--- transmit
--- peer_xmit
--- poll_update
--- receive
--- process_packet
--- poll_update
--- clock_filter
--- clock_select
--- peer_unfit
--- root_distance 0.965042
--- root_distance 0.965042
--- root_distance 0.965042
--- clock_combine
--- root_distance 0.965042
--- clock_update ★ここまでいくと同期成功
--- poll_update
--- local_clock
--- rstclock
--- adj_host_clock
--- adj_host_clock

</toggledisplay>

ツール等

ntpq コマンド

NTP の情報を得るのに最もポピュラーなコマンド。 

$ ntpq -pn
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
-202.224.32.4    210.171.225.76   2 u  975  256  370    5.759   -1.264   0.162
-133.243.232.68  210.171.226.40   2 u   30  256  377    9.018   -1.209   0.386
+210.173.160.27  210.173.160.86   2 u  209  256  377    5.452    0.021   0.123
+210.173.160.57  133.243.236.18   2 u  215  256  377    5.741    0.272   0.111
*210.173.160.87  210.173.176.4    2 u   38  256  377    5.817   -0.100   0.222

$ ntpq -c as

ind assID status  conf reach auth condition  last_event cnt
===========================================================
  1 59668  9314   yes   yes  none   outlyer   reachable  1
  2 59669  9314   yes   yes  none   outlyer   reachable  1
  3 59670  9414   yes   yes  none  candidat   reachable  1
  4 59671  9414   yes   yes  none  candidat   reachable  1
  5 59672  9614   yes   yes  none  sys.peer   reachable  1

$ ntpq -c rl
assID=0 status=06c4 leap_none, sync_ntp, 12 events, event_peer/strat_chg,
version="ntpd 4.2.2p1@1.1570-o Tue Jun 10 00:07:18 UTC 2008 (1)",
processor="i686", system="Linux/2.6.18-194.el5PAE", leap=00, stratum=3,
precision=-20, rootdelay=6.168, rootdispersion=25.945, peer=59672,
refid=210.173.160.87,
reftime=cff96bee.64899eac  Tue, Jul 27 2010 23:30:06.392, poll=8,
clock=cff96dc6.30334e8f  Tue, Jul 27 2010 23:37:58.188, state=4,
offset=0.057, frequency=44.983, jitter=0.321, noise=0.254,
stability=0.060, tai=0

$ ntpq -c "pstatus 59670"
assID=59670 status=9414 reach, conf, sel_candidat, 1 event, event_reach,
srcadr=ntp1.jst.mfeed.ad.jp, srcport=123, dstadr=118.243.85.16,
dstport=123, leap=00, stratum=2, precision=-19, rootdelay=0.427,
rootdispersion=12.009, refid=210.173.160.86, reach=377, unreach=0,
hmode=3, pmode=4, hpoll=10, ppoll=10, flash=00 ok, keyid=0, ttl=0,
offset=0.040, delay=6.133, dispersion=15.059, jitter=0.120,
reftime=cff981d4.b4092641  Wed, Jul 28 2010  1:03:32.703,
org=cff98349.637b8c15  Wed, Jul 28 2010  1:09:45.388,
rec=cff98349.6442e24e  Wed, Jul 28 2010  1:09:45.391,
xmt=cff98349.629de6de  Wed, Jul 28 2010  1:09:45.385,
filtdelay=     6.40    6.13    6.04    6.70    6.37    8.75    6.04    6.54,
filtoffset=    0.16    0.04   -0.18    0.13    0.03   -1.28   -0.29   -0.09,
filtdisp=      0.00   15.36   23.03   30.69   38.39   46.08   53.79   61.47

ntptime コマンド

カーネルの時計関連の情報を表示・設定することができる。 

$ ntptime
ntp_gettime() returns code 0 (OK)
  time cd8dcff1.8d374000  Mon, Apr 13 2009 23:51:29.551, (.551624),
  maximum error 20085 us, estimated error 0 us
ntp_adjtime() returns code 0 (OK)
  modes 0x0 (),
  offset 0.000 us, frequency 77.335 ppm, interval 1 s,
  maximum error 20085 us, estimated error 0 us,
  status 0x1 (PLL),
  time constant 6, precision 1.000 us, tolerance 512 ppm,

それぞれの値の意味は…難しいんだこれが。誰か解説本書いてくれないかなあ。

ntp_adjtime() から返っている status 値は、/usr/include/linux/timex.h で定義されている以下の値を取る。 

/*     
 * Status codes (timex.status) 
 */    
#define STA_PLL                0x0001  /* enable PLL updates (rw) */
#define STA_PPSFREQ    0x0002  /* enable PPS freq discipline (rw) */
#define STA_PPSTIME    0x0004  /* enable PPS time discipline (rw) */
#define STA_FLL                0x0008  /* select frequency-lock mode (rw) */

#define STA_INS                0x0010  /* insert leap (rw) */
#define STA_DEL                0x0020  /* delete leap (rw) */
#define STA_UNSYNC     0x0040  /* clock unsynchronized (rw) */ ★いわゆる 11 分モードのとき、0 になる
#define STA_FREQHOLD   0x0080  /* hold frequency (rw) */

#define STA_PPSSIGNAL  0x0100  /* PPS signal present (ro) */
#define STA_PPSJITTER  0x0200  /* PPS signal jitter exceeded (ro) */
#define STA_PPSWANDER  0x0400  /* PPS signal wander exceeded (ro) */
#define STA_PPSERROR   0x0800  /* PPS signal calibration error (ro) */

#define STA_CLOCKERR   0x1000  /* clock hardware fault (ro) */

#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
    STA_PPSERROR | STA_CLOCKERR) /* read-only bits */

ntpdc コマンド

ちょっとマイナーだけど様々な情報が得られる。 

$ ntpdc -pn
     remote           local      st poll reach  delay   offset    disp
=======================================================================
*210.173.160.87  118.243.85.16    2  256  377 0.00552 -0.000084 0.07770
=202.224.32.4    118.243.85.16    2  256  360 0.00575 -0.001264 0.45509
=133.243.232.68  118.243.85.16    2  256  377 0.00900 -0.001209 0.08156
=210.173.160.27  118.243.85.16    2  256  377 0.00545  0.000021 0.12018
=210.173.160.57  118.243.85.16    2  256  377 0.00574  0.000272 0.09195

$ ntpdc -l
client    ntp3.jst.mfeed.ad.jp
client    orion.asahi-net.or.jp
client    udon.nict.go.jp
client    ntp1.jst.mfeed.ad.jp
client    ntp2.jst.mfeed.ad.jp

$ ntpdc -c "showpeer 210.173.160.27"
remote 210.173.160.27, local 118.243.85.16
hmode client, pmode unspec, stratum 2, precision -19
leap 00, refid [210.173.160.86], rootdistance 0.03963, rootdispersion 0.00789
ppoll 10, hpoll 10, keyid 0, version 4, association 59670
reach 377, unreach 0, flash 0x0000, boffset 0.00400, ttl/mode 0
timer 0s, flags config, bclient
reference time:      cff97e87.bdfef6dd  Wed, Jul 28 2010  0:49:27.742
originate timestamp: cff97f49.6383079f  Wed, Jul 28 2010  0:52:41.388
receive timestamp:   cff97f49.64496620  Wed, Jul 28 2010  0:52:41.391
transmit timestamp:  cff97f49.62b5a175  Wed, Jul 28 2010  0:52:41.385
filter delay:  0.00612  0.00604  0.00668  0.00636 
               0.00874  0.00603  0.00653  0.00629 
filter offset: 0.000040 -0.00017 0.000134 0.000033
               -0.00128 -0.00029 -0.00009 0.000085
filter order:  1        0        2        3       
               4        5        6        7       
offset -0.000177, delay 0.00604, error bound 0.09654, filter error 0.01637

$ ntpdc -c "pstats 210.173.160.27"
remote host:          ntp1.jst.mfeed.ad.jp
local interface:      118.243.85.16
time last received:   550s
time until next send: 474s
reachability change:  11597s
packets sent:         73
packets received:     73
bad authentication:   0
bogus origin:         0
duplicate:            0
bad dispersion:       0
bad reference time:   14
candidate order:      4
flags:     config, bclient, iburst

$ ntpdc -c kerninfo
pll offset:           5.2e-05 s
pll frequency:        44.985 ppm
maximum error:        0.138157 s
estimated error:      0.000237 s
status:               0001  pll
pll time constant:    4
precision:            1e-06 s
frequency tolerance:  512 ppm

$ ntpdc -c loopinfo
offset:               0.000065 s
frequency:            44.985 ppm
poll adjust:          0
watchdog timer:       235 s

$ ntpdc -c sysinfo
system peer:          ntp3.jst.mfeed.ad.jp
system peer mode:     client
leap indicator:       00
stratum:              3
precision:            -20
root distance:        0.00620 s
root dispersion:      0.02278 s
reference ID:         [210.173.160.87]
reference time:       cff96dec.641c9286  Tue, Jul 27 2010 23:38:36.391
system flags:         auth monitor ntp kernel stats 
jitter:               0.000275 s
stability:            0.000 ppm
broadcastdelay:       0.003998 s
authdelay:            0.000000 s

$ ntpdc -c sysstats
time since restart:     6980
time since reset:       6980
packets received:       1415
packets processed:      319
current version:        532
previous version:       0
bad version:            0
access denied:          0
bad length or format:   0
bad authentication:     0
rate exceeded:          0

$ ntpdc -c memstats
time since reset:     7007
total peer memory:    15
free peer memory:     10
calls to findpeer:    533
new peer allocations: 0
peer demobilizations: 0
hash table counts:      0   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        2   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   1   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   0   0   1   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   0   0   0   0   0   0
                        0   0   1   0   0   0   0   0
                        0   0   0   0   0   0   0   0

$ ntpdc -c iostats
time since reset:     7116
receive buffers:      10
free receive buffers: 9
used receive buffers: 0
low water refills:    1
dropped packets:      0
ignored packets:      0
received packets:     1432
packets sent:         2151
packets not sent:     0
interrupts handled:   1414
received by int:      1414

$ ntpdc -c timerstats
time since reset:  7133
alarms handled:    0
alarm overruns:    0
calls to transmit: 0

$ ntpdc -c reslist
   address          mask            count        flags
=====================================================================
0.0.0.0         0.0.0.0               320  noquery, nomodify, nopeer, notrap, kod
y085016.dynamic 255.255.255.255         0  ntpport, interface, ignore
localhost.local 255.255.255.255       911  none
localhost.local 255.255.255.255         0  ntpport, interface, ignore
192.168.1.0     255.255.255.0          44  nomodify, notrap
lab.hagio.org   255.255.255.255         0  ntpport, interface, ignore
192.168.8.0     255.255.255.0         167  nomodify, notrap
192.168.8.1     255.255.255.255         0  ntpport, interface, ignore
192.168.10.1    255.255.255.255         0  ntpport, interface, ignore
::              ::                      0  none
localhost6.loca ffff:ffff:ffff:         0  ntpport, interface, ignore
fe80::20a:79ff: ffff:ffff:ffff:         0  ntpport, interface, ignore
fe80::21f:d0ff: ffff:ffff:ffff:         0  ntpport, interface, ignore
fe80::250:56ff: ffff:ffff:ffff:         0  ntpport, interface, ignore
fe80::250:56ff: ffff:ffff:ffff:         0  ntpport, interface, ignore

$ ntpdc -c monlist
remote address          port local address      count m ver code avgint  lstint
===============================================================================
localhost.localdomain  40435 127.0.0.1            923 7 2      0      6       0
192.168.8.60             123 192.168.8.1           22 3 4    180    290      32
192.168.8.47             123 192.168.8.1          146 3 4    180     96     111
192.168.1.10             123 192.168.1.1           44 3 4    180    230     170
orion.asahi-net.or.jp    123 118.243.85.16         62 4 4    5d0    317     284
ntp1.jst.mfeed.ad.jp     123 118.243.85.16         65 4 4    5d0    225     293
ntp2.jst.mfeed.ad.jp     123 118.243.85.16         64 4 4    5d0    227     299
udon.nict.go.jp          123 118.243.85.16         65 4 4    5d0    225     371
ntp3.jst.mfeed.ad.jp     123 118.243.85.16         64 4 4    5d0    225     380

その他

  • 最近の携帯電話に搭載されている自動時刻合わせ機能は、基地局からの制御情報に含まれる時刻情報を利用している。したがって、i-mode などを用いた NTP でもなければ、標準電波を利用した、いわゆる電波時計でもない。電波っちゃ電波だけど。
「http://hagio.org/wiki/index.php?title=NTP&oldid=778」から取得